December 29, 2016

CES 2017 3D Model Attribution

The following 3D models will be used during the 2017 Consumer Electronics Show (CES) in Las Vegas, Nevada, USA.

 

3D Model Attribution

“okay” by cyclone used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the Flexystruder tool head with NinjaTek SemiFlex.

#3DBenchy by CreativeTools used under the Creative Commons - Attribution - No Derivatives license and was 3D printed on the LulzBot TAZ 6 with the MOARstruder tool head with Taulman t-glase.

#3DBenchy by CreativeTools used under the Creative Commons - Attribution - No Derivatives license and was 3D printed on the LulzBot Mini with the Flexystruder tool head with NinjaTek NinjaFlex.

#3DBenchy by CreativeTools used under the Creative Commons - Attribution - No Derivatives license and was 3D printed on the LulzBot TAZ 6 with the FlexyDually tool head with NinjaTek NinjaFlex and ABS.

Aleph by stevemedwin used under the Creative Commons - Attribution license and was 3D printed with with Proto-pasta Stainless Steel PLA filament and polished.

Arc Gimbal by Whosawhatis used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with TwoBEars PolyLite PLA.

Arch of Triumph by Olooki3D used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with TwoBEars bioFila Linen.

Business Card Crate Fixed by mclambglass used under the Creative Commons - Attribution license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with with Verbatim PLA.

Buzzsaw Cup by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with Proto-pasta Magnetic Iron PLA.

Buzzsaw Vase by Buzzsaw Vase used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the MOARstruder tool head with Chromastrand INOVA-1800.

Celtic Skull (flat base) by RevK used under the Creative Commons - Attribution license and was 3D printed on the LulzBot Mini with the standard tool head with Proto-pasta Magnetic Iron PLA and oxidized.

Celtic Skull (flat base) by RevK used under the Creative Commons - Attribution license and was 3D printed on the LulzBot Mini with the standard tool head with Taulman Nylon Alloy 910.

Christmas Tree by roman_hegglin used under the Creative Commons - Attribution license and was 3D printed on the LulzBot Mini with the Flexystruder tool head with NinjaTek NinjaFlex.

Creepy Reaching Hand by scampbell used under the Creative Commons - Attribution license and was 3D printed on the LulzBot Mini with the standard tool head with Proto-pasta HTPLA with the fine quickprint profile.

Customizable Chain Mail by Revar used under the 2-Clause BSD license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with colorFabb nGen.

Customized Ring/Bracelet/Crown Thing by TylerJ used under the Creative Commons - Attribution - Share Alike license and was 3D printed with Polymaker PC-Max.

Dragon Door Knocker by shira used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Proto-pasta HTPLA with the fine quickprint profile. Print duration: 42 hours.

Dragon Fish by maxxkao used under the Creative Commons - Attribution - No Derivatives license and was 3D printed on the LulzBot Mini with the standard tool head with colorFabb_XT with the fine quickprint profile.

fengshui statue – Qilin by brianhomer used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with PLA with the fine quickprint profile.

fengshui statue – Qilin by brianhomer used under the Creative Commons - Attribution - Share Alike license and was 3D printed with the standard tool head Taulman t-glase.

Flexy Rex by zheng3 used under the Creative Commons - Attribution - Share Alike license and was 3D printed with the standard tool head with TwoBEars bioFila Silk.

folium Knurled Nut by tomburtonwood used under the Creative Commons - Attribution - Share Alike license and was 3D printed with the standard tool head with Polymaker PC-Max. Print duration: 2 hours, 10 minutes.

Fractal Pyramid by ricktu used under the Creative Commons - Attribution license and was 3D printed on the LulzBot TAZ 6 with the MOARstruder tool head with PLA. Print duration: 40 hours. Print weight: 1.7 kg (3.75 lb).

Fully Assembled Ball Bearing by barspin used under the Creative Commons - Attribution license and was 3D printed on the LulzBot Mini with the standard tool head with Taulman Bridge Nylon.

G-Clamp by johann517 used under the Creative Commons - Attribution license and was 3D printed with Polymaker PolyLite PLA and the standard quickprint profile.

Gear Bearing by emmett used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with Verbatim PLA and the standard quickprint profile.

by used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the Flexystruder tool head with SemiFlex.

Gecko DeskPal by modern_gnome used under the Creative Commons - Attribution - Share Alike license and was 3D printed with Taulman t-glase.

Gosper Fractal Vase by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Taulman PCTPE and dyed blue.

Guan yu a chinese ancient hero by stronghero used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with PLA.

Guitar Model by EDPTechEdStudent used under the Creative Commons - Attribution - Share Alike license and was 3D printed with colorFabb woodFill.

Gunny Sack by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed with colorFabb copperFill and polished.

Gyroscope Thing by ImKrille used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with Proto-pasta Magnetic Iron PLA and PLA.

Hamiltonian circuit/cycle by mitrasmit used under the Creative Commons - Attribution - Share Alike license and was 3D printed with TwoBEars bioFila Linen.

Human Skull by skriver used under the Creative Commons - Attribution - Share Alike license and was 3D printed with the standard tool head with Polymaker PC-Max with the fine quickprint profile. Print Duration: 12.5 hours.

John F. Kennedy Bust by mtdna used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 5 with the standard tool head with Proto-pasta Magnetic Iron PLA and oxidized.

Knurled Lamp by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the Flexystruder tool head with NInjaTek SemiFlex.

Lattice Cube by AJ_3D_Printing used under the Creative Commons - Attribution license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Chromastrand INOVA.

Leaf Vase 4 by David_Mussaffi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with Polymaker PC-Max.

Lion by Gargi used under the Creative Commons - Attribution - Share Alike license and was 3D printed with TwoBEars bioFila Silk.

Loggerhead Sea Turtle (poseable) by Loggerhead Sea Turtle (poseable) used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with PLA.

Low Poly Swordsman2 by Davision3D used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with colorFabb bambooFill.

LulzBot Keychain by Aleph Objects used under the Creative Commons - Attribution - Share Alike 4.0 International license and was 3D printed on the LulzBot Mini with the standard tool head with Proto-pasta Magnetic Iron PLA.

Mini – Cathedral by tc_fea used under the Creative Commons - Attribution - Share Alike license and was 3D printedwith TwoBEars bioFila Silk.

Moon Paperweights by pmoews used under the Creative Commons - Attribution license and was 3D printed with Polymaker PC-Max.

New Vase 4 by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 5 with the standard tool head with Taulman Nylon Alloy 910 and dyed green.

New Vase 8 by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the Flexystruder tool head with NinjaTek SemiFlex.

NonVase by rvdovic used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the Flexystruder tool head with NinjaTek NinjaFlex.

nut and bolt (dual) by elnadav12 used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 5 with the Dual Extruder tool head with PLA.

OSHW logo Keychain by Make-a-tronik used under the Creative Commons - Attribution - Share Alike license and was 3D printed with colorFabb nGen.

OSHW logo Keychain by Make-a-tronik used under the Creative Commons - Attribution - Share Alike license and was 3D printed with colorFabb nGen with support.

OSHWA Vase by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike 4.0 International license and was 3D printed on the LulzBot TAZ 6 with the MOARstruder tool head with Polymaker PolyLite PLA.

Owl Statue by cushwa used under the Creative Commons - Attribution license and was 3D printed on the LulzBot Mini with the standard tool head with colorFabb bambooFill.

Plunderbuss Pete by bendansie used under the No Rights Reserved license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Proto-pasta HTPLA and with the fine quickprint profile. Print duration: 24 hours.

Plunderbuss Pete by bendansie used under the No Rights Reserved license and was 3D printed on the LulzBot TAZ 5 with the standard tool head with ABS and with the fine quickprint profile.

Raptor Reloaded by E-Nable used under the 2-Clause BSD license and was 3D printed on the LulzBot TAZ 5 with the standard tool head with Chromastrand INOVA-1800.

Raptor Reloaded by E-Nable used under the 2-Clause BSD license and was 3D printed on the LulzBot Mini with the Flexystruder tool head with NinjaTek SemiFlex.

RC Car by 3DRacers used under the Creative Commons - Attribution - Share Alike license and was 3D printed with Polymaker PC-Max.

Robots vs. Wizards-WizRook by dutchmogul used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with Proto-pasta Stainless Steel PLA.

Rock2pus by Aleph Objects used under the Creative Commons - Attribution - Share Alike 4.0 International license and was 3D printed on the LulzBot TAZ 6 with HIPS.

Rocktopus by Kent Johnson used under the Creative Commons - Attribution - Share Alike 4.0 International license and was 3D printed with Polymaker PC-Max.

Roman Colosseum by CausalJoemama7 used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Polymaker PolyLite PLA.

Screw and Nut by Ysoft_be3D used under the Creative Commons - Attribution - Share Alike license and was 3D printed with NinjaTek NinjaFlex.

Stone Gazebo by Herrigold used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot Mini with the standard tool head with colorFabb nGen. Print duration: 15+ hours.

t-slot profile: 2525 by discocyborg used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Taulman PCTPE.

t-slot profile: 2525 by discocyborg used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 5 with the standard tool head with Taulman Bridge Nylon.

t-slot profile: 2525 by discocyborg used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with Taulman Nylon Alloy 910.

Twilamp by scroll used under the Creative Commons - Attribution - Share Alike license and was 3D printed with PLA.

USA Terrain by SocietyForPrintableGeography used under the Creative Commons - Attribution - Share Alike license and was 3D printed with Taulman t-glase.

Wave Vase by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the MOARstruder tool head with Taulman t-glase. Print duration: 6 hours. Print weight: 0.45 kg (1 lb).

Webbed Cup 2 by jasomarr used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with TwoBEars bioFila Silk. Print duration: 4 hours.

Wheels Addon Pack by johann517 used under the Creative Commons - Attribution license and was 3D printed on the LulzBot TAZ 5 with the FlexyDually tool head with NinjaTek NinjaFlex and colorFabb nGen.

Wireframe Skull Pencil Holder by philnelson used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the standard tool head with colorFabb nGen with the fine quickprint profile.

Zigzag Vase by BenitoSanduchi used under the Creative Commons - Attribution - Share Alike license and was 3D printed on the LulzBot TAZ 6 with the MOARstruder tool head with Taulman t-glase. Print duration: 43 minutes.