Small Herringbone Gear, LulzBot Green (x3)
These 3D printed LulzBot Green small herringbone gears are direct replacements for the small gear used in all LulzBot TAZ 6, LulzBot Mini, and earlier tool heads. This three pack makes replacing the small herringbone gear on both the standard and dual extruder tool heads easy, and insures minimal down time due to small gear wear.
Note: Transfer the M3 set screw and M3 nut from the original existing small herringbone gear. Purchase a set screw and nut if the original gear is unavailable.
- Parts & Specifications
Parts Included
Three (3) Small Herringbone Gears
Additional Items Required
One (1) M3 Set Screw, Cup Point, 6 mm (0.24 in) Length
One (1) M3 Nut
Specifications
3D Printed in LulzBot Green ABS plastic