Printing organic shapes with no flat surface? Complex geometry where support removal is next to impossible? Tired of time-consuming cleanup on your mechanical parts? Try this water-soluble 3D printing filament from Polymaker and leave those design limitations behind.The PolyDissolve S1 filament pairs perfectly with the TAZ Dual Extruder v3 Tool Head, freeing you to focus solely on your design, instead of how to make it 3D printable.
While developing the LulzBot TAZ Dual Extruder v3 Tool Head, we tested numerous dedicated support filaments. PolyDissolve S1 emerged the favorite for the following reasons:
- Softens and dissolves in plain tap water, improved by regular replacement and agitation
- More reliable printing with a wider print temperature range 210°C-230°C
- Stronger adhesion to other printing materials
- Less prone to moisture absorption from the air
- Parts & Specifications
Filament Diameter: 2.85 mm (0.11 inches)
Amount of Filament: 750g (1.65 lbs)
Filament Colors: Natural off-white
Special Tool Head Requirements: Dual Extruder v3 Tool Head recommended
Hot End Temperature Range: 210°C-230°C
Print Surface: Applying a glue stick (such as Elmer's® brand) directly to the print surface before starting your LulzBot 3D printer is strongly recommended for increased printed object adhesion.
PolyDissolve S1 filament ships vacuum sealed and mounted on a reel.
Store your filament in an air tight container. The filament arrives in a resealable bag recommended for storage. The use of desiccant is encouraged as PolyDissolve S1 filament will absorb moisture from the air.