Suited for Intermediate Users

nGen

ColorFabb nGen filament is engineered for prototyping and production. This co-polyester filament by colorFabb brings together the strength and precision found in Eastman Amphora 3300 3D polymer, optimized for desktop 3D printing. 

It also exhibits minimal warping and responds well to post-processing techniques like sanding.

Works with: LulzBot TAZ Pro, LulzBot TAZ Workhorse, LulzBot Mini 2, LulzBot SE Tool Head, LulzBot SL Tool Head, LulzBot HS Tool Head, LulzBot HS+ Tool Head, LulzBot TAZ 6, LulzBot Mini 1, LulzBot TAZ 5, LulzBot TAZ 1-4, LulzBot TAZ/Mini Aerostruder v2 Micro, LulzBot TAZ/Mini Aerostruder, LulzBot TAZ Dual Extruder, LulzBot TAZ FlexyDually, LulzBot TAZ MOARstruder, LulzBot Long Block Hot End, LulzBot Hexagon, LulzBot TAZ 6 Hexagon, LulzBot TAZ 5 Hexagon, LulzBot TAZ 1-4 Budaschnozzle, LulzBot Budaschnozzle
  • Features

    Interlocking parts, models, figurines, and functional prototypes print well due to the low shrink rate and excellent layer adhesion. When 3D printed your objects will be glossy, opaque, and bright. nGen 3D printing filament is an excellent choice for 3D printing in close quarters due to its low-odor and styrene-free nature.

    For best performance, print with a heated PEI print surface.

  • Parts & Specifications

    Filament Specifications

    Filament Diameter: 3 mm (0.12 inches)

    Amount of Filament: 0.75 kg (1.65 lbs)

    Filament color may vary

    Printing Specifications

    Special Tool Head Recommendation: LulzBot Hexagon Hot End recommended

    Hot End Temperature: 230°C

    Print Surface: PEI print surface recommended

    Print Surface Temperature: 85°C

    To make removing 3D printed nGen objects easier, we strongly recommend applying a glue stick (such as Elmer's® brand) to the print surface prior to powering on your LulzBot 3D printer.

    Maintain the print surface by powering off your LulzBot and cleaning the glue stick residue with a soft cloth and water.

    Packaging Information

    Sold in a sealed air-tight pouch, this filament is loaded onto a reel.