Suited for Advanced Users

LulzBot v2 (Hexagon) Hot End

Custom built for custom 3D printers, this hexagon hot end has been designed to be the best upgrade you can make to your RepRap or other DIY 3D printer. The all-metal construction on this LulzBot hot end raises your maximum extrusion temperature to 300°C. A lengthened heater block increases the melting zone to allow you to print faster and more reliably. The compact cooling zone provides cooling while not sacrificing build area.

  • Features

    3D Print exotic and specialty filament with confidence by using our LulzBot v2 Hot End. Choose between the 0.6mm nozzle for faster, stronger 3D prints, the 0.35mm nozzle for fine surface details, and the balanced 0.5mm nozzle for the best of both worlds. Each nozzle diameter option is still capable of fine layer heights of 0.05mm and as large as the nozzle diameter.

  • Parts & Specifications

    Parts Included

    Assembled LulzBot Hexagon Hot End: 

    24v Ceramic Heater Cartridge

    NTC 100k Thermistor

    Aluminum Mounting Plate

    Heater and Thermistor Wire Extension (Not terminated)


    Recommended Filament Diameter: 3mm

    Nozzle Diameter: 0.35mm, 0.5mm, or 0.6mm

    Recommended always-on cooling fan: 5.5v Micro Blower

    Alternate fan shroud: Sized for 30/40mm fans