Suited for Advanced Users

LulzBot TAZ FlexyDually Tool Head v1

It's time to unleash your LulzBot® TAZ! Now advanced users can print with both flexible and standard materials, during a single print run. Your industrial-grade LulzBot® TAZ is now more versatile than ever. You can use multiple materials to make parts with built-in dampeners or grips, stretchable straps with built-in buckles, or fittings with gaskets.

Works with: LulzBot TAZ 5, LulzBot TAZ 4
  • Features

    The LulzBot® TAZ FlexyDually Tool Head v1 features one standard tool head for materials like ABS, PLA, and HIPS, and a second LulzBot TAZ Flexystruder Tool Head v1 that allows you to print with flexible filaments like NinjaFlex and SemiFlex®. Both of these extruders can heat up to 240 degrees Celsius and are mounted on a single carriage.

    Each nozzle diameter is .5mm which is optimized for flexible filaments. The .5 diameter slightly reduces X-Y resolution versus the .35mm nozzle on the Dual Extruder, however the increased diameter makes this tool head excellent at printing with flexible filaments. Changing nozzles is not recommended, instead print performance can be optimized through your LulzBot 3D printing software.

    Using stiff, non-flexible filament with the green flexystruder is not advised as it can lead to premature extruder body wear and purging difficulty when switching between materials.

  • Parts & Specifications

    Parts Included

    LulzBot® TAZ FlexyDually Tool Head v1

    Filament spool holder and components

    Cable zip ties

    Second tool head power cable

    Filament feed tube

    Specifications

    Required filament diameter: 3mm

    Hot end temperature range: 120°C - 250°C

    Nozzle size for both extruders: 0.5mm

    Using stiff, non-flexible filament with the green flexystruder is not advised as it can lead to premature extruder body wear and purging difficulty when switching between materials.

    Build Volume Impact: This tool head does not reduce the available build volume on your LulzBot TAZ because it features smaller stepper motors.