Suited for Advanced Users

Laybrick, 3mm Filament, 250g Coil (CC-Products)

Give your custom designs a timeless quality by printing them with Laybrick stone filament. Architectural models, organic shapes, and replicas print well due to the near-zero warping. Paint, sand or grind the model or even vary the print temperature to achieve a smooth finish or a rough texture.

Works with: LulzBot Mini 2, LulzBot Mini 1, LulzBot TAZ 6, LulzBot TAZ 5, LulzBot TAZ 1-4, LulzBot TAZ/Mini Aerostruder, LulzBot TAZ Dual Extruder, LulzBot Hexagon, LulzBot TAZ 6 Hexagon, LulzBot TAZ 5 Hexagon, LulzBot Budaschnozzle
  • Features

    This material shows very little warp and does not need to be printed on a heated bed. The extrusion temperature ranges similar to PLA, from 180°C - 200°C with 185°C being the normal extrusion temperature. Hotter temperatures will result in a rougher texture. In general, if you have printed with PLA you should be able to quickly start printing with the Laybrick filament.

  • Parts & Specifications

    Filament Specifications

    Filament Diameter: 3 mm (0.12 inches)

    Amount of Filament: 250g (0.55 lbs)

    Filament color may vary

    Printing Specifications

    Special Tool Head Requirements: Hot end with 0.50mm nozzle recommended

    Hot End Temperature Range: 185°C-215°C

    Print Surface: PEI film recommended

    Print Surface Temperature: 60°C

    Packaging Information

    Laybrick filament ships coiled.

See below for more information about this filament from its manufacturer: