Suited for Intermediate Users

Heat-Set Insert Tapered, M5-0.8 mm Internal Thread, 6.7 mm L (x20)

Integrating strong and reliable screw threading into your 3D designs is easy! Once integrated into your work flow, you'll be quite attached.

Use brass Heat-Set Inserts to add threaded mounting points to your 3D printed objects. While it is possible to thread bare plastic, repeated use can cause wear leading to threading failure. Heat Set Inserts are designed to be heated past the plastic glass transition temperature and inserted into the plastic part.

  • Parts & Specifications

    Parts Included

    20 (twenty) Threaded Brass Heat-Set Inserts

    Specifications

    Designed for M5 screws

    Length: 6.7 mm (0.26 in)

    Internal Diameter:  5 mm (0.197 in)

    Screw Pitch: 0.8 mm (0.03 in)