Perk up your prints with Coffee PLA by Proto-pasta! By combining recycled coffee components with Proto-pasta's premium High Temperature PLA, your prints can have a natural-appearing brown finish while performing better than normal PLA in warm environments.
In addition to it's invigorating fragrance during the printing process, Coffee PLA can have two different finishes: translucent when freshly printed, or opaque when heat-treated!
Anneal (heat-treat) your 3D printed objects in an oven at 60°C(140°) - 110°C(230°F) for less than an hour, or until your printed object takes on an opaque finish. Once heat-treated, your 3D printed part will be stiffer, stronger, and able to withstand warmer environments up to 140°C (285°F). Do not leave printed objects unattended while in an oven.
- Parts & Specifications
Filament Diameter: 2.85 mm (0.11 inches)
Amount of Filament: 500g (1.1 lbs)
Filament color may vary
Hot End Temperature: 225°C (Range: 220-230°C). Do not exceed 230°C
Print Surface: PEI film recommended
Print Surface Temperature: 60°C
Coffee PLA ships vacuum sealed and spooled on a reel.