Flexibility meets strength with 618 nylon from Taulman 3D. Not only is 618 nylon stronger than PLA and ABS, it's more chemically resistant and has a lower coefficient of friction. Since objects printed in 618 nylon are so strong, sturdy, and flexible you can replace existing components. Custom washers, wearing surfaces, and weight-bearing surfaces work well when printed. 618 nylon 3D printed parts will change the way you look at breakdowns and upgrades on the job.
618 nylon is recommended for experienced users. Nylons can be challenging to 3D print due to warping, delamination and bed adherence. Like other Taulman nylons, 618 nylon is glossy white with medium-opacity and can be dyed to achieve custom color profiles using Rit® brand dye.
- Parts & Specifications
Filament Diameter: 3 mm (0.12 inches)
Amount of Filament: 1lbs (0.45kg)
Filament color may vary
Special Tool Head Requirements: LulzBot Hexagon Hot End recommended
Hot End Temperature Range: 238°C
Print Surface: PEI film is recommended with a glue stick (such as UHU® brand) applied to the print surface prior to powering on your LulzBot 3D printer. Maintain the print surface by powering off your LulzBot and cleaning the glue stick residue with a soft cloth and water.
Print Surface Temperature: 110°C
618 Nylon filament ships vacuum sealed and mounted on a reel.
Store your filament in an air tight container. The use of desiccant is encouraged as nylon filament will absorb moisture from the air.