Suited for Advanced Users

40mm Pelonis Low Flow Fan

Keep your cool with these low flow 40mm Pelonis fans. These fans are used on the LulzBot TAZ 6 3D printer. Use two 24V fans to cool the extruded filament for crisp, clean 3D printed parts. Use one 5V fan to cool the heat sink on the LulzBot Hexagon Hot End. Designed as a direct replacement, the wire ends are terminated with a metal pin compatible with the existing tool head harness.

  • Parts & Specifications

    Parts Included

    1 fan

    24V Specifications

    40mm x 40mm x 10mm

    24VDC, 42mA, 1.02W

    Fan power: 7000RPM, 6.13CFM

    Weight: 16.8g

    5V Specifications

    40mm x 40mm x 10mm

    5VDC, 78mA, 0.39W

    Fan power: 4400RPM, 3.87CFM

    Weight: 16.8g

    Connector Specifications

    Bare Pin: Output (Male) Molex SL 16-02-0108

    Compatible Housing: Molex SL series