Great for Beginners

SE Tool Head | 2.85 mm | Single Extruder | 0.5 mm

Product Alert (2)
Works with: LulzBot Mini 2, LulzBot TAZ Workhorse, LulzBot TAZ Pro
Support: SE Tool Head | Single Extruder | 0.5 mm
*NOT AVAILABLE - Get an alert when this becomes available
Enter your email address to receive an email when this product becomes available.
  • Features

    The LulzBot SE Tool Head features a genuine E3D Titan Aero Extruder/Hot End with a 0.50 millimeter nozzle enabling out of the box 3D printing with over 35 materials, including flexibles! This tool head is currently compatible with the LulzBot Mini 2 3D Printer. LulzBot Mini 1, TAZ 5 & TAZ 6 users can add this tool head with the TAZ 5/6 Universal Tool Head Adapter and the Mini 1 Universal Tool Head Adapter.

    A high-output centrifugal fan and quad-port cooling duct support elaborate prints with extensive bridging, cooling filament in 360-degrees before it has time to sag between points.

    The Universal Mounting System makes swapping tool heads easy, you'll have the right tool head for the right job installed in minutes.

  • Parts & Specifications

    Parts Included

    (1) LulzBot SE Tool Head | 0.5 mm (Fully Assembled)


    Layer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)

    Filament Diameter: 2.85 mm

    Nozzle Diameter: 0.5 mm

    Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

    Hot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 73 seconds

    Extruder & Hot End: Genuine E3D Titan Aero

    Required power system: 24 Volts

    Fans: (1) 5v 40 mm heat sink cooling fan, and (1) 360° print cooling fan

    Recommended filament diameter: 2.85 mm diameter (3 mm)

    Certified Open Source Hardware: US000138

  • Resources & Documentation

WARNING: Cancer and Reproductive Harm -