Suited for Intermediate Users

M175 Tool Head | 1.75 mm | Single Extruder | 0.5 mm

LulzBot honors your freedom to print.
Add 1.75 mm filament capability to your LulzBot 3D printer and open up an even wider variety of 3D printing materials.  The M175 Tool Head is here to bring the world of 1.75 mm material to your LulzBot Mini 2, TAZ Workhorse, and TAZ Pro. 

Product Alert (2)
Works with: LulzBot Mini 2, LulzBot TAZ Workhorse, LulzBot TAZ Pro
Support: M175 Tool Head | 1.75mm Single Extruder | 0.5mm
*NOT AVAILABLE - Get an alert when this becomes available
Enter your email address to receive an email when this product becomes available.
  • Features

    The 1.75 mm dual-drive extruder on the new LulzBot M175 Tool Head feeds material reliably. Built to handle the toughest industrial-strength materials to the most basic materials, the M175 prints a wide range of filament - from nylon and soft flexible materials to PLA and rigid and brittle carbon-filled high-strength materials. 

    Material changes are easy using the quick release lever.  A thumbscrew tensioner allows the you to fine-tune the pressure exerted by the drive gears onto the filament. It provides uninterrupted material flow without fear of grinding or slipping. 

    The lightweight hot end provides superior heat break performance - it conducts 85% less heat than a standard threaded heat break. The small hot end mass allows for more rapid motion. 

    M175 Airflow

    The M175 Tool Head comes with a 0.5 mm Bridgemaster™ nozzle for beautiful, high-resolution prints.

    The sturdy fan duct mounts with one screw and has been designed for maximum efficiency using airflow analysis to ensure even 360° part cooling. The fan duct also provides a clear view of the printing surface so you can inspect layer quality during printing.

  • Parts & Specifications

    Parts Included

    (1) LulzBot M175 Tool Head | 0.5 mm (Fully Assembled)


    Layer Resolution: 0.05 mm - 0.5 mm (0.002 in - 0.020 in)

    Filament Diameter: 1.75 mm

    Nozzle Diameter: 0.5 mm

    Nozzle: Slice Engineering® Bridgemaster™ nozzle

    Hot End Temperature Range: 120°C - 290°C (248°F - 554°F)

    Hot End Heatup Time: From 23°C to 210°C (73°F to 410°F) in 95 seconds

    Extruder & Hot End: Bond Tech BMG, Slice Engineering® Mosquito Hotend®

    Required power system: 24 Volts

    Fans: (1) 5v 25 mm heat sink cooling fan, and (1)  24v centrifugal print cooling fan

    Weight: 436.5 g (0.96 lbs)

  • Resources & Documentation

WARNING: Cancer and Reproductive Harm -