The LulzBot TAZ 6 Print Area The LulzBot TAZ 6 Physical Dimensions

Printing


Print Technology
Print Volume Dimensions280 mm x 280 mm x 250 mm (11.02 in x 11.02 in x 9.80 in)
Print Volume19,600 cm³ (1,185 in³)
Ambient Operating TemperatureFrom 5°C to 45°C (41°F to 113°F)
Operating Footprint82 cm x 65.5 cm x 52 cm (32.28 in x 25.79 in x 20.47 in)
Maximum Travel Speed
Leveling
ConnectivityUSB Serial and Included 8gb SD Card
Included Tool Head
Extruder/Hot EndHexagon Hot End
Nozzle Diameter
Nozzle MaterialBeryllium Copper
Nozzle TemperatureUp to 290°C (554°F)
Nozzle Heatup TimeFrom 27°C to 230°C (80°F to 446°F) in 2 minutes, 55 seconds
Print SurfaceHeated Borosilicate Glass/PEI
Maximum Print Bed TemperatureUp to 120°C (248°F)
Print Bed Heat Up TimeFrom 27°C to 100°C (80°F to 212°F) in 7 minutes, 11 seconds
Layer Resolution
Minimum Positive Feature Size0.5 mm (0.02 in)
Calculated XYZ positional resolution10, 10, <1 microm
Dimensional accuracy±0.2mm

Materials


Filament Diameter2.85 mm
Supported Materials compatible with PLA, Natural and Metal PLA Blends, TPU, ABS, PETG, nGen, INOVA-1800, HIPS, HT, t-glase, Alloy 910, Polyamide, Nylon 645, Polycarbonate, PC-Max, PC+PBT, PC-ABS Alloy, PCTPE, and more.

Additional Items Included


Comprehensive Tool KitIncludes: Hangable LulzBot bag, replacement wiper pads, part removal tool, scrub pads, glue stick, precision knife, long nose pliers, 7 piece hex key set, metric ruler, dental pick, and tweezers.
Comprehensive DocumentationIncludes: SD Card with source files, Quick Start Guide, Quality Assurance Record, and more.
First 3D Print MaterialA small length of PLA filament is included to be used in your first 3D print, the LulzBot Rock2pus!

Physical Dimensions


Boxed Unit Weight19.5 kg (43 lbs)
Unit Weight14.97 kg (33 lbs) without filament spool
Boxed Dimensions88.9 cm x 30.48 cm x 66.04 cm (35 in x 12 in x 26 in)
Dimensions with 1kg Filament Spool82 cm x 63 cm x 52 cm (32.28 in x 24.8 in x 20.47 in)

Software


Operating System CompatibilityGNU/Linux, Mac, Windows
Recommended Software
FirmwareMarlin
Supported File Types.stl, .obj, .x3d, .3mf, .png, .jpg

Electrical


Power Requirements100VAC-240VAC, 50Hz-60Hz, 3.2A max
Output24VDC
Power SupplyPMC-24V150W1AA
Power CableIEC cord, C13 to region-specific connector

Safety and Compliance


CertificationsFCC, CE, WEEE, OSHWA, FSF-RYF
Warranty Optional one, two, or three-year extended warranties available.
Country of OriginMade in USA from domestic and imported components.