t-glase by Taulman 3D
Taulman t-glase filament 3D prints well while also offering a high degree of translucence. Models printed in t-glase have a great surface finish, can reflect light well, and depending on the part geometry, can even shimmer and gleam. One of the more exciting characteristics of this Taulman 3D printer filament is its ability to act as a light pipe to transmit light. Use larger layer heights for enhanced translucence.Product Alert (3)
- Printing Performance Recommendation:
One of best characteristics of the Taulman t-glase filament is its optical properties (translucence and light-pipes). Printing with a tool head with a larger nozzle diameter (0.50mm) is preferred. If the optical properties are not the important characteristic t-glase prints well with either nozzle diameter (0.35mm/0.50mm).
- Print Surface Recommendation:
Applying a glue stick (such as Elmer's® brand) directly to the print surface before starting your LulzBot 3D printer is strongly recommended for increased printed object adhesion.
- Packaging Note:
Reel diameter and packaging style may vary based on color selection. The Taulman t-glase filament weight remains the same.
t-glase is a PETT based filament that can be used in most desktop 3D printers. This filament is 100% recyclable and experiences very little shrinking and is available in a range of colors. This filament can be extruded under a wide temperature range.
- Parts & Specifications
Filament Diameter: 3 mm (0.12 inches)
Amount of Filament: 1 lb (0.45 kg)
Filament color may vary
Special Tool Head Requirements: LulzBot Hexagon Hot End recommended
Hot End Temperature Range: 230°C
Print Surface: PEI film recommended
Print Surface Temperature: 60°C
Reel diameter and packaging style may vary based on color selection. Filament weight remains the same.
T-Glase filament ships vacuum sealed and mounted on a reel
- Resources & Documentation