Suited for Advanced Users

PA-CF Low Warp by colorFabb

3 mm , 700g reel

PA-CF Low Warp by ColorFabb is strong, durable, and engineered to bring dimensional stability to industrial-strength nylon, making it ideal for engineers looking for stronger prints with faster turn-around times.

Parts printed with PA-CF Low Warp have higher impact resistance, resist deformation, while retaining strength in harsh and demanding environments. This unique and premium blend combines strength and dimensional stability (less than 2% elongation at break - ASTM638) with the ability to perform in higher operating temperatures up to approximately 120° C (248° F).

Product Alert (1)
  • CAUTION

    The makeup of this filament makes it highly abrasive for most standard tool heads. Use a tool head with hardened steel components that is designed for materials similar to this one, such as the HS Tool Head 0.8 mm or the HS+ Tool Head 1.2 mm.

Works with: LulzBot Mini 2, LulzBot Mini 1, LulzBot TAZ 6, LulzBot TAZ 5
Support: colorFabb PA-CF
US$8500
*NOT AVAILABLE - Get an alert when this becomes available
Enter your email address to receive an email when this product becomes available.
  • Features

    PA-CF Low Warp by ColorFabb excels in tensile and impact strength and retains its mechanical properties while under continuous use in hot environments up to 120°C. 

    Unlike other nylon-based materials, PA-CF Low Warp is designed to resist moisture absorbtion. When compared to traditional nylon material like PA6, PA-CF Low Warp will take four times as long to reach the same moisture saturation level.

    Note: This material is highly abrasive. The HS Tool Head 0.8 mm and the HS+ Tool Head 1.2 mm contain hardened steel components that can withstand long-term 3D printing with abrasive materials like PA-CF Low Warp. Use of this material with other tool heads and hot ends is not recommended.

  • Parts & Specifications

    Filament Specifications

    Filament Diameter Class: 3 mm (0.12 inches)

    Amount of Filament: 700 g (1.54 lbs)

    Filament color may vary

    Printing Specifications

    Special Tool Head Required:  HS Tool Head 0.8 mm & HS+ Tool Head 1.2 mm

    Hot End Temperature: 275°C

    Print Surface: PEI print surface recommended

    Print Surface Temperature: 110°C

    While this material is more resistant to absorbing moisture than other nylon blends, for best results, store this material in a dry and sealed environment.

  • Resources & Documentation

    Print Profiles

    Find the most up-to-date print profiles, including hot end and print bed temperatures in Cura LulzBot Edition

    Note: This material is highly abrasive. The HS Tool Head 0.8 mm and the HS+ Tool Head 1.2 mm contain hardened steel components that can withstand long-term 3D printing with abrasive materials like PA-CF Low Warp. Use of this material with other tool heads and hot ends is not recommended.

    More Information

    Manufacturer website

    Safety Data Sheet

    Technical Data Sheet

High Strength 3D Printing

The LulzBot Labs technicians put PA-CF Low Warp to the test.