Nylon 645 by Taulman 3D
Not only is 645 nylon stronger than PLA and ABS, it's more pliable, lighter and has a lower coefficient of friction.Product Alert (2)
- Separate Accessory Recommendation:
Printing nylon is easier, stronger, and cleaner when printed at the higher extrusion temperatures that our LulzBot Hexagon Hot End can reach.
- Print Surface Recommendation:
645 is a nylon filament material, therefore applying a glue stick (such as Elmer's® brand) directly to the print surface before starting your LulzBot 3D printer is strongly recommended for increased part adhesion.
Since objects printed in 645 nylon are so strong and still flexible you can replace existing components. From clasps and buckles, to weight-bearing surfaces and parts subject to friction, nylon 3D printed parts will change the way you look at breakdowns and upgrades on the job.
Like other Taulman nylons, 645 nylon is glossy white with medium-opacity and can be dyed to achieve custom color profiles using Rit® brand dye.
- Parts & Specifications
Filament Diameter: 3 mm (0.12 inches)
Amount of Filament: 1lbs (0.45kg)
Special Tool Head Requirements: LulzBot Hexagon Hot End recommended
Hot End Temperature Range: 238°C
Print Surface:PEI film recommended with a glue stick (such as UHU® brand) applied to the print surface prior to powering on your LulzBot 3D printer. Maintain the print surface by powering off your LulzBot and cleaning the glue stick residue with a soft cloth and water.
Print Surface Temperature: 110°C
Filament color may vary
645 Nylon filament ships vacuum sealed and mounted on a reel.
Store your filament in an air tight container. The use of desiccant is encouraged as nylon filament will absorb moisture from the air.
- Resources & Documentation