Laywoo-D3 (LayWood) by CC-Products
While your 3D prints are rooted in technology they can have a more natural appearance when printed with our Laywoo-D3 wooden filament.Product Alert (3)
- WOOD ALLERGEN WARNING:
This product contains natural wood fibers. Discontinue use immediately if rash, irritation, discomfort or other allergic reactions develop. If skin irritation develops, wash thoroughly with soap and water. Consult your physician if the allergic reactions persist.
- Compatibility Alert:
Due to the fibrous nature of this filament, we strongly recommend using a LulzBot Tool Head with a .5mm nozzle for optimal 3D printing performance.
This item is no longer being stocked. Refunds or exchanges are not being offered on this item.
The material has shown no warping tendencies when printed on a heated bed during testing. Extrusion temperature is fairly wide with a good starting point at 180C. Hotter temperatures will extrude a darker filament; using variable temperatures during a print a faux wood ring pattern can be generated. Finished prints can also be easily sanded, glued and sealed.
- Parts & Specifications
Filament Diameter: 3 mm (0.12 inches)
Amount of Filament: 250g (0.55 lbs)
Filament color may vary
Special Tool Head Requirements: Hot end with 0.50mm nozzle recommended
Hot End Temperature Range: 175°C-230°C
Print Surface: PEI film recommended
Print Surface Temperature: 60°C
Laywoo-3D filament ships in a coil.
- Resources & Documentation