Sale: Laybrick by CC-Products
Give your custom designs a timeless quality by printing them with Laybrick stone filament. Architectural models, organic shapes, and replicas print well due to the near-zero warping. Paint, sand or grind the model or even vary the print temperature to achieve a smooth finish or a rough texture.Product Alert (1)
- Compatibility Alert:
Due to the mineral content of Laybrick filament, we strongly recommend using a LulzBot Tool Head with a 0.5mm nozzle for optimal 3D printing performance.
This material shows very little warp and does not need to be printed on a heated bed. The extrusion temperature ranges similar to PLA, from 180°C - 200°C with 185°C being the normal extrusion temperature. Hotter temperatures will result in a rougher texture. In general, if you have printed with PLA you should be able to quickly start printing with the Laybrick filament.
- Parts & Specifications
Filament Diameter: 3 mm (0.12 inches)
Amount of Filament: 250g (0.55 lbs)
Filament color may vary
Special Tool Head Requirements: Hot end with 0.50mm nozzle recommended
Hot End Temperature Range: 185°C-215°C
Print Surface: PEI film recommended
Print Surface Temperature: 60°C
Laybrick filament ships coiled.
- Resources & Documentation