3D-Fuel Pro PLA has higher impact strength than ABS and Standard PLA with a heat resistance rivaling that of ABS! Pro PLA also boasts 4.3 times the impact strength of PLA.
    Anneal your design after 3D printing for even better heat resistance.

Filament Specifications

Filament Diameter: 1.75 mm (0.068 inches)

Amount of Filament: 1 kg (2.2 lb)

Printing Specifications

Special Tool Head Requirements: LulzBot M175 Tool Head recommended



Hot End Temperature Range: 210°C-240°C

Print Surface: Glass Bed with PEI or glue stick recommended.

Print Surface Temperature: 0°C-60°C

Recommended Print Speed: 40 – 100 mm/s

HDT (Unannealed) 60°C  

HDT (Annealed) 90°C

Quality:

All 3D-Fuel 3D printer filament is manufactured to demanding performance specifications.

The tolerances of each individual spool of filament are printed on the box.

Packaging Information

Full 1kg (2.2lbs) Pro PLA arrives in individual boxes wound on easy-to-use spools and is vacuum sealed with a desiccant packet to keep out any moisture.

Color Representation Disclaimer

Actual filament colors may vary from the computer monitors representation.  Monitors display colors differently. We try to ensure our photos are as life-like as possible, but the actual color may vary slightly from your monitor. We cannot guarantee that the color you see accurately portrays the true color of the product.

Print Profiles

Find the most up-to-date print profiles, including hot end and print bed temperatures, by selecting your Free Software program of choice:

Cura LulzBot Edition

 

More Information

Material Safety Data Sheet

Technical Data Sheet