Suited for Intermediate Users

5 Amp Nano Polyfuse (x3)

These fast acting 5 amp nano polyfuses serve as the first line of defense for the full-sized RAMBo control electronics used in the LulzBot TAZ by protecting against potenial damage caused by shorting. This three pack of LulzBot 3D printer fuses provides a full replacement set for the hot end/logic fuse, the stepper drivers fuse, with one additional fuse to be held in reserve as further backup.

  • Features

    This three pack of nano polyfuses are designed for quick replacement in the RAMBo control electronics used on the LulzBot TAZ and other RepRap-style 3D printers.

    Fuse replacement is easy! Use the tweezers included with the LulzBot TAZ and LulzBot Mini tool kit to lift the fuse straight out of the fuse holder. Replace the fuse by pushing the replacement fuse straight in with your fingers. 

  • Parts & Specifications

    Parts Included

    Three (3) Nano Polyfuses

    Specifications

    Rated Amperage: 5 Amps

    Maximum Voltage Rating: 125 Volts

    Nominal Resistance: 0.015 Ohms 

    Reduction of Hazardous Substances (RoHS) Compliant: Yes

    Length: 6.10 mm ± 0.20 mm (0.24 in ± 0.008 in)

    Height: 2.69 mm ± 0.25 mm (0.11 in ± 0.01 in)

    Width: 2.69 mm ± 0.25 mm (0.11 in ± 0.01 in)