Suited for Intermediate Users

100k Semitec NTC Thermistor, 235mm

Manufactured by Semitec, this glass thermistor is encapsulated with a copper jacket by E3D to improve heat transfer and to add strength and stability for secure installation into a hot end heater block.

This 100k Semitec NTC Thermistor is used to sense temperatures up to 300°C (572°F). Select temperature table #5 for the correct temperature reading in Marlin-based firmware.

Designed as a direct replacement for the thermistor used on the LulzBot Long Block Hot End and LulzBot TAZ MOARstruder Tool Head, this component is terminated with bare connector pins.

Product Alert (1)
  • Installation Warning

    Failure to properly secure the heater cartridge and/or thermistor can lead to damage to people or property.

Works with: LulzBot TAZ MOARstruder, LulzBot Long Block Hot End
Support: 100k Semitec NTC Thermistor, 235mm
US$1200
*NOT AVAILABLE - Get an alert when this becomes available
Enter your email address to receive an email when this product becomes available.
  • Features

    This glass thermistor is encapsulated with a copper cover for secure installation into a hot end heater block with either a locking screw or a locking plate.

  • Parts & Specifications

    Parts Included

    1 Cartridge style NTC thermistor with molex SL connector

    1 wiring extension

    Specifications

    Resistance: 100 kΩ when measured at 25°C (77°F)

    Wiring: 60 mm (2.36 in) length, terminated with molex SL connector

    Cartridge Outside Diameter: 3 mm (0.12 in)

    Cartridge Length: 15 mm (0.59 in) with copper housing

    Extension Wiring: 175 mm (6.89 in) length, terminated with bare molex SL connector pins

     

  • Resources & Documentation