Suited for Advanced Users

Polycarbonate by Village Plastics

3 mm , 1kg reel

Polycarbonate 3D printer filament is strong and resists deforming at higher temperatures, unlike other more common 3D printer filaments. Parts 3D printed in polycarbonate will be strong, stiff and rigid.

Product Alert (3)
  • Separate Accessory Required!

    Tool heads equipped with the new LulzBot Hexagon Hot End can safely heat up to 300C and can be used to 3D print polycarbonate. The previously offered Budaschnozzle cannot safely heat to the required ~300°C to extrude Polycarbonate. The LulzBot TAZ 5 (and up) & LulzBot Mini are both capable of printing with polycarbonate out of the box.

  • Print Surface Recommendation:

    Applying a glue stick (such as Elmer's® brand) directly to the print surface before starting your LulzBot 3D printer is strongly recommended for increased printed object adhesion.

  • Note:

    This item is no longer being stocked. Refunds or exchanges are not being offered on this item.

Works with: LulzBot Mini 2, LulzBot Mini, LulzBot TAZ 6, LulzBot TAZ 5, LulzBot TAZ/Mini Aerostruder, LulzBot TAZ Dual Extruder, LulzBot TAZ FlexyDually, LulzBot Hexagon, LulzBot TAZ 6 Hexagon, LulzBot TAZ 5 Hexagon
Support: Polycarbonate
US$1000
*NOT AVAILABLE - Get an alert when this becomes available
Enter your email address to receive an email when this product becomes available.
  • Features

    Polycarbonate is strong and resists deforming at higher temperatures unlike other more common 3D printer filaments. Parts 3D printed in polycarbonate will be strong, stiff and rigid.

  • Parts & Specifications

    Filament Specifications

    Filament Diameter: 3 mm (0.12 inches)

    Amount of Filament: 1 kg (2.2 lbs)

    Average Length of Filament: 141.5m

    Filament color may vary

    Printing Specifications

    Special Tool Head Requirements: LulzBot Hexagon Hot End required

    Hot End Temperature Range: 300°C

    Print Surface: PEI film recommended

    Print Surface Temperature: 110°C

    Packaging Information

    Polycarbonate filament ships vacuum sealed and mounted on a reel.

    Storage Specifications

    Store your filament in an air tight container. The use of desiccant is encouraged as polycarbonate will absorb moisture from the air.

     

  • Resources & Documentation

    Print Profiles

    Find the most up-to-date print profiles, including hot end and print bed temperatures, by selecting your Free Software program of choice:

    Cura LulzBot Edition

    Slic3r

    More Information

    Manufacturer website

    Material Safety Data Sheet