Electronics Mount Plate Kit

The Electronics Mount Plate kit, for Prusa or Mendel design Reprap 3D printers, is capable of mounting RAMPS and/or Sanguinololu electronics. The mount plate is made of 5.5mm thick clear acrylic that allows for better viewing than wooden mounting plates. Also, you have no worries of slicing your arm open on a sharp acrylic corner as the plate has rounded edges.

This kit version of the Electronics Mount Plate includes all of the needed parts and hardware to mount the plate to a Reprap 3D printer. We have thrown in 4 nylon standoffs to hold your electronics off the mount plate but this kit does not include the remaining hardware needed to mount your selected electronics to the mount plate.

Specifications

• Capable of mounting RAMPS and/or Sanguinololu electronics
• 5.5mm thick clear acrylic
• Size: 28cm x 9cm x 5.5cm
• Rounded corners

Part List

• Acrylic Electronics Mount Plate
• x4 Printed Mount Plate Bracket
• x4 6.35mm Nylon Standoff
• Compatible with M3 or 4-40 screws
• x8 M3 35mm SHCS
• x8 M3 Nyloc nut
• x16 M3 Washer

Sources

Wiki page

Thingiverse part